All CLI commands cache changes. Normally there should be no need to set this manually. Aerohive (Extreme Networks) APs - No Controller Needed You will then need to call the change_baudrate_poll() method at regular intervals until it returns a true (1) value indicating that the change is complete. The default prompt match pattern used is: The first form of this method allows reading the current setting; the latter will set the new Y/N prompt and return the previous setting. This mode of operation is useful when sending configuration commands to the host device. Arrow keys can navigate between previous/next items and also move down into a nested menu. If the slots attribute is defined but empty (i.e. Which other arguments are used depends on the whether the object was created for Telnet, SSH or Serial port. As shown in Figure 2, ExtremeCloud IQ queries the cloud SSH proxy servers to get an available port, generate credentials, and create a user. if more_paging is set to 2, two pages of output will be collected and a q character will be sent to the second --more-- prompt received. The non_recognized_login argument flag controls whether the method should immediately return when an initial login output sequence is not recognized or whether the method should keep trying to read login output until either a recognized login prompt is detected or expiry of the timeout. As long as it is set to a valid Extreme Networking product type, then all other global attributes are available as well as all the relevant attributes for the family type specified (a full list of available attributes is returned by specifying attribute all). If however these command prompts for additional data were indefinite, the cmd methods would never return. I have routing enabled in the CLI. Before sending the command to the host, any pending input data from host is read and flushed. The default value is set to 10. You will then need to call the device_peer_cpu_poll() method at regular intervals until it returns a true (1) value indicating that the change is complete. Note that if no debug_file is defined all debug messages will be printed to STDOUT. In non-blocking mode (blocking disabled), the enable() method will most likely immediately return with a false, but defined, value of 0. This attribute is useful for maintaining a unique reference for the device. On success the method returns a true (1) value. Note that all the extra functionality that this module offers over and above Control::CLI, is only possible if connected to an Extreme (or ex Avaya/Nortel) device. If the command generated no error messages on the host, then the command was successful and the result is true (1). 11-27-2019 04:19 PM I have an 2348 switch that is acting as a layer 3 switch. to a Terminal Server device) or if console() has been manually set; see console(). In short, by calling the connect() method it is not necessary to call the login() method afterwards. See errmode() for a description of valid settings. The site navigation utilizes keyboard functionality using the arrow keys, enter, escape, and spacebar commands. See errmode(). This setting can also be overridden directly in cmd() or cmd_prompted() using the 'more_pages' argument. Speak to Us About Creating Your Infinite Enterprise, CLI Troubleshooting Commands for the Cloud. Must renew the certificate validity to resolve this issue: The message can be provided in 3 chunks: $string1 is always present, followed by an optional string reference (to dump large amout of data) and $string2. This attribute will remain undefined if connected to the Standby CPU of a PassportERS device. See errmode(). CLI Command Reference Guide for Ethernet Routing Switch 4800 Series Version 5.10 Sep 2016 Configuring IP Routing and Multicast on Ethernet Routing Switch 4800 Series Version 5.10 Scott Gilmour - Senior Software Qualification Engineer - LinkedIn The first parameter, or "use" argument, is required and should take value either "TELNET" or "SSH" (case insensitive) or the name of the Serial port such as "COM1" or "/dev/ttyS0". To stop logging debug messages to a file, call this method with an empty string as the argument. Any Help? Spacebar will open the current menu. Attributes for other product families different from the current value of family_type will be undefined. These can be retrieved via the username, password, passphrase and enable_password methods. For SSH, only SSHv2 is supported with either password or publickey authentication. The "connection_timeout" argument can be used to set a connection timeout when establishing Telnet and SSH TCP connections; this is fed to Control::CLI::connect(). is_slx_s: Flag; true(1) if the device is an SLX-S switch. switch# ls ? Note also that this functionality is only available if the host is detected as an Extreme Networking product, i.e. This program is free software; you can redistribute it and/or modify it under the terms of either: the GNU General Public License as published by the Free Software Foundation; or the Artistic License. This method returns the outcome (true or false) of the last command sent to the host via any of the cmd() or cmd_prompted() methods. This class is written so that all the above products can be CLI scripted in a consistent way regardless of their underlying CLI variants. From this point onwards, the behaviour of this method upon failure will depend on whether a specific baudrate was provided or whether the desired baudrate was specified as 'max'. Control::CLI::Extreme is a sub-class of Control::CLI allowing CLI interaction customized for Extreme (including ex-Avaya/ex Nortel Enterprise) Networking products over any of Telnet, SSH or Serial port. In non-blocking mode (blocking disabled) the login() method will most likely immediately return with a false, but defined, value of 0. In this case, to avoid waiting expiry of timeout, set the reset_prompt argument. Arguments after $ok will only be defined if $ok is true(1). The same value will also set an upper limit to how many times a 'y' is fed to Y/N confirm prompts for the same command in the cmd() method. Want to learn more about SSH Proxy and CLI troubleshooting? Normally this is the internal method used by change_baudrate() and change_baudrate_poll() methods. The CLI commands themselves might still vary across the different products though, even here, for certain common functions (like entering privExec mode or disabling terminal more paging) a generic method is provided by this class. Command-line interface - Wikipedia Once set, the object CLI --More-- prompt match patterns is only used by the cmd() and cmd_prompted() methods. show ip directed-broadcast vlan. The cmd() method will use this patterm match to detect these Y/N confirmation prompts and automatically feed a 'Y' to them so that the command is executed as you would expect when scripting the device - see cmd(). On success a true (1) value is returned otherwise the error mode action is performed. http://rt.cpan.org/NoAuth/Bugs.html?Dist=Control-CLI-Extreme, http://annocpan.org/dist/Control-CLI-Extreme, http://cpanratings.perl.org/d/Control-CLI-Extreme, http://search.cpan.org/dist/Control-CLI-Extreme/. See errmode(). The wake_console argument is only relevant when connecting to a Telnet port other than 23 (i.e. Our global marketing team is made up of knowledgeable, passionate, and creative individuals. The attribute() method allows to retrieve the value of such attributes. In the first & third forms only a success/failure value is returned in scalar context, while in the second & fourth forms, in list context, both the success/failure value is returned as well as any output received from the host device during the connect/login sequence; the latter is either the output itself or a reference to that output, depending on the object setting of return_reference or the argument override provided in this method. If a password is required, but not supplied, this method will try supplying first a blank password, then the same password which was used to connect/login and finally, if prompt_credentials is true for the object, prompt for it. Arguments after $ok will only be defined if $ok is true(1). By default this functionality is disabled. In non-blocking mode (blocking disabled), the change_baudrate() method will most likely immediately return with a false, but defined, value of 0. To minimize the chance of this happening the disconnect & destroy methods for this class will automatically try to restore whatever baudrate was used when initially connecting to the device. In this case the XOS switch will not request a login until the user has hit a key. If instead the connected device is not in ACLI mode then it will simply send $cmdcli. The "prompt_credentials" argument is provided to override the global setting of the parameter by the same name which is by default false. By default the wake string is "\n". Via` the CAPWAP management protocol, ExtremeCloud IQ, sends the IP address of the SSH proxy server, random port, username, and credential to the AP or switch. a BaystackERS or ExtremeXOS switch in non-stacking/standalone mode) and undefined if no slot/port information could be retrieved from the device, e.g. to a Terminal Server device) or if console() has been manually set; see console(). See login(). If a CLI command is found to generate a prompt for additional data - i.e. See errmode(). Text Conventions Extreme - How to collect a show tech or a tech-support on Extreme The "terminal_type" and "window_size" arguments are Control::CLI arguments and are not overrides, they will change the object parameter as these settings are only applied during a connection. It is a drop in replacement for the Control::CLI::AvayaData module following the transfer of the Avaya Data business unit to Extreme Networks. If publickey authentication fails for any reason and password authentication is possible, then password authentication is attempted next; otherwise the error mode action is performed. Control::CLI::Extreme is a sub-class of Control::CLI (which is required) and therefore the above functionality can also be performed in a consistent manner regardless of the underlying connection type which can be any of Telnet, SSH or Serial port connection. is_fabric_engine: Flag; true(1) if the device is a FabricEngine switch; false(0) otherwise. If there is a problem restarting the serial port connection at the new baudrate then the error mode action is performed (now also in 'max' mode) - see errmode(). For any other family_type (including 'generic', SecureRouter & WLAN2300) this method will simply return success in 'max' mode and the error mode action otherwise (there is no way to change the baudrate configuration on SecureRouter & WLAN2300 devices to a value other than 9600 baud; there is no knowledge on how to do so on 'generic' devices). By default debugging is disabled. This method sets the prompt used by the object instance to match the prompt that certain Extreme Networking device CLI commands will generate to request additional info. The CLI prompt expected by the cmd() method is either the object prompt previously set by any of connect(), login() or prompt(); or it is the override prompt specified by the optional prompt method argument. I have routing enabled in the CLI. Attributes which only apply to ISW family type: is_isw: Flag; true(1) if the device is an ISW industrial switch; false(0) otherwise. See errmode(). To set or stop debugging use the debug() method. PassportERS family_type) you can append '-y' to the command being sent to suppress the Y/N confirmation prompt, in which case you can simply do: However, other Extreme Networking devices do not accept a '-y' appended to the reset/boot commands (e.g. model: Device model e.g. This is equivalent to simply calling SUPER::change_baudrate(). You will then need to call the cmd_poll() method at regular intervals until it returns a true (1) value indicating that the command is complete. All CLI commands cache changes. Thus if the attribute family_type is not yet defined or is set to 'generic' then an error will be returned. In the first form the current pattern match string is returned. All the other arguments are optional. Aerohive was acquired by Extreme Networks in late 2019, but their hardware really hasn't changed since. If the family_type attribute is not yet set or is set to generic then all other attributes, including the other Global ones, will be undefined. Extreme Networks Product Documentation . This is the base MAC address from which all other device MACs (VLAN, Port, etc) are derived. Im trying to figure out the commands lines to get onto the SSID's in order to change their password. If not provided and prompt_credentials is true then this method will prompt for it. To enable the functionality set $bytesPerDot to a non zero value; this value will represent every how many bytes of input data read an activity dot will be printed.